Specially formulated for use on metal roof and wall panels
BUTYL TAPE-SEAL™ was designed specifically for the metal building industry to provide optimal sealing in the harshest environments.
It adheres to most clean, dry metal surfaces and does not harden, bleed or stain. With pressure, it fills minor irregularities in the surface and seals the joints providing an effective barrier against water, moisture, dust, and dirt.
BUTYL TAPE-SEAL™ is an excellent choice for use around windows, doors, roof vents, stacks, access doors, and other penetration points.
Adheres To
• Painted Metal
• Galvalume®
• Kynar®
• Aluminized Metal
SIZES
Stocked sizes - Others available upon request
*DB denotes double bead
*TB denotes triple bead
PACKAGING
BUTYL TAPE-SEAL™ is extruded butyl material with a silicone backed release paper that is rolled and cut to specific lengths. Our master cartons are constructed of 200 pound test material and the rolls are separated by silicone divider pads and protected by upright stacking cores.
APPLICATION
For optimum sealing the surfaces should be free of oil, dust, dirt and moisture. Light films of lubricant on unpainted metals should not adversely affect performance. It can be applied in cold temperatures however, at temperatures below 40°F, any condensation or frost present should first be removed. Position product in desired location and press in place through the release paper. When using to seal applications involving fasteners, position on the entry side to prevent penetration of weather elements through fastener holes. Remove release paper prior to assembly / fastening of adjoining surface.
CLEAN UP
Mineral spirits will readily facilitate the cleaning of tools and equipment.
BUTYL TAPE-SEAL™ meets or exceeds the following specifications: MIL-C-1969B, Type II, Class B TT-C-1796A, Type II, Class B (supersedes MIL-C-18909B) AAMA 804.3-92 and 807.3-92USDA Acceptable Freight Classification: Caulking Compound, NOIBN, NFMC #149610, Class 55
