METAL-TO-WOOD SELF-PIERCING SCREWS
Engineered to reduce burrs and provide more resistance to back-out!
LOW ANGLE THREAD
Resists Loosening
SAW TOOTH THREAD
Lower Tapping Torque
MILLED SLOT
Penetrates Fast
BURR BUSTER® POINT
Reduces Burrs and Chips
REDUCES BURRS
Problem
Ordinary self-piercing screws produce burrs during installation that can damage the washer and corrode the panel!
Solution
The BURR-BUSTER® point is designed to extrude the metal as it penetrates, minimizing burrs.
RESISTS BACK-OUT
Problem
Solution
MEETS FLORIDA BUILDING CODE 1506.6 & R904.5.2 (TRI-SEAL® & SS ONLY)
All screws are plated with TRI-SEAL® M1 1,000-hrs salt spray coating for superior corrosion protection
SIZES | BURR BUSTER® WITH TYPE 17 MILLED POINT
Can be painted with our Kalida-Kote paint finish to your exact color match.
#10-12 | CARBON STEEL | 1/4” HWH
Washer: .500” Dia. BondSealer 26ga G90 to EPDM
#12-12 | CARBON STEEL | 1/4” HWH
Washer: .562” Dia. BondSealer 26ga G90 to EPDM
#14-12 | CARBON STEEL | 5/16” HWH
Washer: .590” Dia. BondSealer 26ga G90 to EPDM
INSTALLATION
Use a 2,500 RPM screw-gun with torque control or depth sensing feature. Impact tools are not recommended.
